| Part No. |
W78E516D/ W78E058D/ W78I516/ W78I058D |
| Datasheet |
W78E516D_W78E058D_W78I516D_W78I058D.pdf |
| Description |
The W78E(I)516D/W78E(I)058D series is an 8-bit microcontroller which has an in-system programmable Flash EPROM for on-chip firmware updating. The instruction set of the W78E(I)516D/W78E(I)058D is fully compatible with the standard 8052. The W78E(I)516D/W78E(I)058D series contains a 64K/32K bytes of main Flash EPROM and a 4K bytes of auxiliary Flash EPROM which allows the contents of the 64K/32K bytes main Flash EPROM to be updated by the loader program located in the 4K bytes Flash EPROM; a 256 bytes of SRAM; 256 bytes of AUXRAM; four 8-bit bi-directional and bit-addressable I/O ports; an additional 4-bit port P4; three 16-bit timer/counters; a serial port. These peripherals are supported by an 8 sources 2-level interrupt capability. To facilitate programming and verification, the Flash EPROM inside the W78E(I)516D/W78E(I)058D series allows the program memory to be programmed and read electronically. Once the code is confirmed, the user can protect the code for security. The W78E(I)516D/W78E(I)058D series microcontroller has two power reduction modes, idle mode and power-down mode, both of which are software selectable. The idle mode turns off the processor clock but allows for continued peripheral operation. The power-down mode stops the crystal oscillator for minimum power consumption. The external clock can be stopped at any time and in any state without affecting the processor. |
| Features |
- ully static design 8-bit CMOS microcontroller(up to 40MHz)
- Optional 12T or 6T mode
- Wide supply voltage of 2.4 to 5.5V
- Max operation frequency up to 40Mhz@12T mode
- 64K/32K bytes of in-system programmable FLASH EPROM for Application Program(APROM)
- 4K bytes of auxiliary FLASH EPROM for Loader Program(LDROM)
- Low standby current at full supply voltage
- 512 bytes of on-chip RAM. (include 256 bytes of AUX-RAM, software selectable)
- 64K bytes program memory address space and 64K bytes data memory address space
- Four 8-bit bi-directional ports with high sink current for LED driver
- One 4-bit multipurpose programmable port, additional INT2/ INT3
- Support Watch Dog Timer
- Three 16-bit timer/counters
- One full duplex serial port
- 8-sources, 2-level interrupt capability
- Software Reset
- Built-in power management with idle mode and power down mode
- Code protection
|
| Diagram |
N/A |
| Package |
| PART NO. |
EPROM FLASH SIZE |
RAM |
PACKAGE |
Temperature grade |
| W78E516DDG |
64K Bytes |
512B |
DIP - 40 Pin |
0ºC~70ºC |
| W78E516DPG |
512B |
PLCC - 44 Pin |
| W78E516DFG |
512B |
PQFP - 44 Pin |
| W78E516DLG |
512B |
LQFP - 48 Pin |
| W78E058DDG |
32K Bytes |
512B |
DIP - 40 Pin |
0ºC~70ºC |
| W78E058DPG |
512B |
PLCC - 44 Pin |
| W78E058DFG |
512B |
PQFP - 44 Pin |
| W78E058DLG |
512B |
LQFP - 48 Pin |
| W78I516DDG |
64K Bytes |
512B |
DIP - 40 Pin |
-40ºC~85ºC |
| W78I516DPG |
512B |
PLCC - 44 Pin |
| W78I516DFG |
512B |
PQFP - 44 Pin |
| W78I516DLG |
512B |
LQFP - 48 Pin |
| W78I058DDG |
32K Bytes |
512B |
DIP - 40 Pin |
-40ºC~85ºC |
| W78I058DPG |
512B |
PLCC - 44 Pin |
| W78I058DFG |
512B |
PQFP - 44 Pin |
| W78I058DLG |
512B |
LQFP - 48 Pin | |
| Other Files |
N/A |
| Development Tools |
N/A |
| Others |
N/A |